|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 824-IF70.0M-WA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 824-IF70.0M-WA . TYPE : 24.7 x9.0 SMD 70.0 MHz IF SAW Filter Jan. 01, 2007 70.0 MHz IF SAW Filter PART NUMBER : 824-IF70.0M-WA .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple within fo+/-50.0Khz 3dB Bandwidth 50dB Bandwidth Relative Attenuation: from 10.0 to 69.2 MHz from 70.8 to 110.0 MHz Absolute Delay at Fo IN/OUT Return Loss at Fo 50 50 57 57 3.22 dB dB sec dB Minimum 0.25 Typical 70.0 8.5 50 50 -0.03 0.4 0.33 0.98 Maximum 12.0 1.0 1.1 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz *With Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedance values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 200nH Q>40 L2 = 180nH Q>40 C1 = 100pF C2 = 51pF Source/Load Impedance = 50 ohms Pin Descriptions: IN-10, OUT-5, GROUND- 1,2,3,4,6,7,8,9 Oscilent Corporation IF SAW Filter | 824-IF70.0M-WA Page 2 of 2 FREQUENCY RESPONSE Part No.: 824-IF70.0M-WA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 824-IF700M-WA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |